FS Register FRN 1029698

Five Star Rated on Google

13+ years specialist broking experience

General information, not advice. Written for general guidance and drawing on external sources as well as our own experience. It isn't a personal recommendation and doesn't take account of your circumstances — full disclaimer and sources.

Wood pellet and woodchip producer insurance illustration with silo, pellets and chip pile

Wood Pellet & Woodchip Producer Insurance UK

November 20, 2026

Published: 20 November 2026 · Category: Energy · Author: John Miller, Miller & Partner

Last reviewed by John Miller — 20 November 2026

Making pellets or processing woodchip? We place dust, dryer and fire risks with insurers who understand them.

Quick answer

What insurance does a wood pellet or woodchip producer need?

Pellet mills and woodchip processors need property cover for buildings, plant and stock that accepts the fire and dust explosion risk from drying, grinding and pelletising wood. They also need machinery breakdown for dryers, hammer mills and pellet presses, business interruption to cover lost production, employers' liability, and products liability in case poor-quality fuel damages a customer's boiler. Insurers will ask about your DSEAR assessment, spark detection and how stockpiles are managed before they quote.

Why producers are hard to insure

Turning timber into fuel concentrates almost every hazard an underwriter dislikes. Drying uses heat. Chipping, hammer milling and pelletising create fine wood dust, which can explode in the right concentration. Pellet presses run hot, and finished pellets and chip are stored in bulk, where they can self-heat. A single spark from a hammer mill can travel down ductwork into a silo or dryer.

As a result, many standard commercial insurers decline pellet and chip production outright, and those that do quote often impose high fire excesses or exclude dust explosion. Specialist property and Lloyd's markets will write it, but only with good evidence of how the risk is controlled.

The cover you need

CoverWhat it protects
Property damageBuildings, dryers, mills, presses, silos and conveyors
StockRaw timber, chip and bagged or bulk pellets
Machinery breakdownSudden failure of dryers, mills, presses and electrical plant
Business interruptionLost gross profit while production is stopped
Employers' liabilityInjury to staff, including noise and dust exposure claims
Public and products liabilityInjury or damage caused by your premises or your fuel

Products liability and fuel quality

Your fuel ends up in other people's boilers. Pellets with too many fines, chip that is too wet or oversized, or fuel contaminated with stones, metal or treated wood can block feeds, damage boilers and occasionally cause fires. When that happens, the boiler owner's insurer will look to recover its costs from the supplier.

Check that your products liability cover isn't limited to bodily injury, doesn't exclude damage to the product itself in a way that removes most of the cover, and has a limit that reflects the value of the boilers you supply into. Certification under ENplus for pellets, or a quality assurance scheme for chip, plus registration on the Biomass Suppliers List, helps show insurers your quality control is sound.

The controls insurers look for

  • A current DSEAR risk assessment with zoning and explosion protection where needed.
  • Spark detection and extinguishing on dust extraction and conveying lines.
  • Explosion venting or suppression on silos, filters and dryers.
  • Temperature monitoring of stockpiles and silos, with a plan for hot spots.
  • Regular cleaning to stop dust building up on beams, electrical equipment and light fittings.
  • A hot works permit system for maintenance.
  • Separation between production, storage and offices, and fire-fighting water on site.

A risk survey that records these controls is usually the key to getting terms. We'll prepare you for it and present the site to insurers in its best light.

Frequently asked questions

Do insurers cover dust explosions?

Some do, some don't. Many standard policies exclude explosion other than of boilers. Specialist markets will cover dust explosion where there is a DSEAR assessment and suitable protection.

Are pellets and chip covered for spontaneous combustion?

Often not by default. Self-heating is a common exclusion, so ask for it to be removed or check what controls the insurer needs.

Can a small woodchip business get cover?

Yes. Small chip processors and log and chip merchants are insured every day. The key is a clear description of the process and good housekeeping.

Do I need products liability if I only sell chip locally?

Yes. A single damaged boiler can lead to a claim for repairs, replacement heating and the owner's lost RHI income.

Struggling to insure a pellet or chip operation? We work with specialist markets that write dust and fire risks.

John Miller, Director and Principal Broker at Miller & Partner
Written and reviewed byJohn MillerDirector & Principal Broker, Miller & Partner. Over 13 years of specialist commercial insurance experience, placing hard-to-place energy, property and liability risks through Lloyd's syndicates and specialist MGAs, including heat networks, anaerobic digestion and biomass.
Our regulatory statusMiller & Partner Limited (FRN 1029698) is an Appointed Representative of Gauntlet Risk Management Ltd (FRN 308081), which is authorised and regulated by the Financial Conduct Authority. Miller & Partner Limited is registered in England and Wales (company number 16206282) and trades from Vivian House, Roman Bridge Close, Mumbles, Swansea SA3 5BG. This article is general information, not a personal recommendation or an offer of cover. Cover is subject to insurer acceptance and the full terms, conditions and exclusions of the policy issued.
Back to Blog
About this article General information, not advice. Published for general guidance and drawing on external sources as well as our own experience. It is not a personal recommendation, a quotation, or an offer of cover, and it doesn't take account of your circumstances. Read more + Close −

Where the information comes from

Our articles are compiled from a range of sources: regulators and public bodies such as the FCA, the Civil Aviation Authority, the Health and Safety Executive and Companies House; government publications and legislation; industry and trade bodies; insurer and market documentation; and published research and news reporting. Not everything stated originates from Miller & Partner. Where information comes from a third party we believe it to be accurate at the date of publication, but we haven't independently verified every external source and we don't warrant its accuracy or completeness. Where a point matters to a decision you're making, go to the original source and check it.

Figures, examples and case studies

Premium ranges, cost figures, limits and worked examples are illustrative only. They are not quotations, not offers of cover, and no cover is provided or implied on the basis of them. What you're actually charged depends on underwriting, and what you're actually covered for depends on the policy wording issued to you. Where an article includes a claim example, scenario or case study, it is illustrative unless we say otherwise — such examples are typically composites written to show how a policy section responds, and they don't describe an identifiable client, claim or settlement.

Interactive tools

Any calculators, cover checkers, risk assessors or similar tools on our site produce general guidance from the small number of answers you give them. They can't see your business, and their output is not a personal recommendation, an assessment of your actual risk, or a quotation.

Rules and market conditions change

Law, regulation, tax treatment, insurer appetite and policy wordings all change, sometimes at short notice. Content is accurate to the best of our knowledge on the date shown on the article and we don't undertake to update it as things move. An article you're reading some time after publication may be out of date.

Third parties and external links

References to insurers, underwriters, trade bodies, software, training providers or other organisations are for information only. They don't imply endorsement, recommendation, partnership or affiliation in either direction unless stated. We're not responsible for the content of external websites we link to.

Not legal, tax or accounting advice

Nothing here is legal, tax, accounting or regulatory advice. Where an article discusses statutory duties, contract terms or compliance obligations, take advice from an appropriately qualified professional on your own position before acting.

How we write these

We use AI tools in researching and drafting our published content. Every article is reviewed and signed off by a named, accountable person at Miller & Partner before it is published, and responsibility for what appears here rests with us.

Our regulatory status

Miller & Partner Ltd is an Appointed Representative of Gauntlet Risk Management Ltd, which is authorised and regulated by the Financial Conduct Authority (FRN 308081). Miller & Partner Ltd is entered on the FCA Register under reference 1029698. Registered in England and Wales, company number 16206282. Registered office: Vivian House, Roman Bridge Close, Mumbles, Swansea, SA3 5BG.

Spotted something wrong?

We'd rather know. Email [email protected] or call 01792 001350 and we'll review and correct it.

For advice on your own insurance arrangements, speak to us directly — that's when we can take your circumstances into account and give you a recommendation.

Ready to protect your business?
Get expert advice and a tailored commercial insurance quote today.

✔ Independent broker
✔ Access to leading UK insurers
✔ Fast turnaround

[Request a quote]

[[email protected]]
[Call 01792 001350]

Exclusive Offer

Free Insurance Review
& Zero Broker Fee

Let us review your current insurance and see if we can improve your cover while reducing the cost.

✓
Free no-obligation insurance review tailored to your business
£
Zero broker fee on all new policies
⚡
Fast response from a real insurance specialist

You're in 🎉

Thanks for requesting your free review. We'll be in touch shortly.

🔒 No spam, ever. Your details are safe with us.

We're an Appointed Representative of Gauntlet Risk Management Ltd, which is authorised and regulated by the FCA. You can check our entry on the FCA Register.

MEET THE Director

Hey, I'm John!

I started Miller & Partner with the aim to bring back personable, approachable broking to UK businesses who were tired of large corporate brokers and feeling like they were just another number.

I have built this brokerage up with no pushy sales techniques or big business tactics, just honest, approachable and professional relationships with my clients.

Over 13 years experience in business insurance

Client first approach

5* rated broker on Google

Office: Vivian House, Roman Bridge Close, Mumbles, Swansea, SA3 5BG

Miller & Partner Ltd is an Appointed Representative of Gauntlet Risk Management Ltd, which is authorised and regulated by the Financial Conduct Authority (FRN 308081). Miller & Partner Ltd is entered on the Financial Services Register under firm reference number 1029698. You may check this on the Financial Services Register by visiting the FCA website at https://www.fca.org.uk/firms/financial-services-register or by contacting the FCA on 0800 111 6768. Miller & Partner Ltd is registered in England & Wales, company number 16206282. Registered office: 20 Vivian House, Roman Bridge Close, Swansea, SA3 5BG.